Skip to content

24v 10 amp relay


24volt 10 amp relay for use with Hello Sailor. This can be used in conjunction with the relay output to switch loads such as a fridge on and off remotely.

Wire terminal 86 to 12v positive

Wire terminal 85 to Hello Sailor Relay terminal via a 1 amp fuse.

Hello sailor will then switch between linking terminal 30 to terminals 87 and 87A to control your load. Please see the Hello Sailor Installation Manual for a wiring diagram.

When switched on via Hello Sailor, this relay draws 0.15A, which isn’t much, but to use even less power, it’s advisable to fit a manual switch on the load you are controlling, which bypasses the relay. The relay can then be turned off via Hello Sailor once you are onboard your boat.

Hello Sailor